Fundamentals of Soft Prototyping
Communication Design Project Winter Semester 2018/2019
Rhine-Waal University of Applied Sciences FabLab Kamp-Lintfort
by Adriana Cabrera
Pattern Making and Laser Cutting
In the following links you can find the introduction of Modular Pattern
In the following presentation you can find the introduction of Pattern Making
References
Open Source Fashion from Sofia Guridi, Textile Lab Amsterdam
Esin Dumaz FabLab Kamp-lintfort
introduction Valentina Software
Assignment
Based on a grid, you will design an interlocked pattern, this pattern must be adjusted very well either with press fit, or with the adjustment of the hinges. female male system. the pieces will be cut on the laser cutter.
Document what type of material was used and what settings were used in what laser cutter.
This design will fit a three-dimensional construction, preferably a piece of clothing designed with the Valentina software.
Upload the file in the repository to download
Don’t forget to document the process ❤ ☺!
Have fun this week.