Fabrication for Care

Interdisciplinary Project Winter Semester 2018/2019
Rhine-Waal University of Applied Sciences FabLab Kamp-Lintfort
by Adriana Cabrera, Prof. Karsten Nebe, Prof. William Megill
Faculty Enviroment and Energy

Actuators and Sensors

In the following Presentation you can find some information of Actuators and Sensors that we discussed in the last session

Final Project Presentation

In the following Presentation you can find aguidelines for the developmenot of your fina project and what you should bring for this Thursday

Schedule

1. Individual introduction of an assignment: we want to present the Audience what you did/ develop and troubleshooting during this Semester, the presentation of this assignment should take 3 min, and you will use your website as a resource of explanation for the project.
2. Presentation teams: eeach team should make a presentation of your project with the four requirements discussed in the last weeks, please consider what we have concerning:
3. This project is an assistive device, so it needs to be a system composed of sensing and actuation. (we will work on it in the next days)
4. This device is intended to be wearable or to fit the person ( personalized ).
5. DIY, The prototype of this project must be initialised in the FabLab.
6. This device needs to be aesthetically pleasing.

Assignment

For this Thursday please bring the following points:

7. small mock up: what is making how will works your final project


8. Project plan what will happen the next weeks